16 Channels Remote Control Digital System RECEIVER
  2 Miles of Line-of-Sight range Up to 10 Miles with Long Range Antenna
  Over 64,000 Codes, Indoor use enclosure, Power On and RF Activity Indicators

Wiring Diagram 937016   $399.99  Antenna not supplied Select Antenna Select Transmitter:   1 Ch Transmitter  4 Ch Transmitter

SPECIFICATIONS  Operating Voltage: 12 to 15.o VDC  Operating Temperature: -4° to +140° F (-20° to +60° C)  Receiver Type: Digital Superheterodyne  Sensitivity: -118 dB (minimum)  Selectivity: 6 KHz  Carrier Frequency: 27,255 MHz  Number of Codes: 65,536  Code Setting Method: DIP switch programming  Data Input: Alarm, restore, status, and low battery  Antenna Impedance: 50 Ohms Quarter Wave  Optional Whip 8" Antenna  Dimensions: 7.9 in L x 1.25 in W x 6.5 in H (201 x 32 x 165 mm)  Weight: 1.5 lb. (0.680 Kg)  Current Drain: 300 mA (max) @ 12 VDC, typical standby 65 mA alarm @ 12 VDC  Outputs: Alarm - form "C" relay per channel  Status exception - one open collector output per receiver;   Low Battery - one open  collector output per receiver (Audio and signal strength test points) 16 outputs are all low current (100mA at 12VDC)   Optional  Power relay    Latch relay      Power adapter 120VAC to 12 VDC Select Transmitter:  1 Ch Transmitter    4 Ch Transmitter

---