|
|
 |
1 Channel Remote Control
Digital RECEIVER
2 Miles of
Line-of-Sight range Up to 10 Miles with
Long Range Antenna
Over 64,000 Codes,
Weather-Resistant
Case, Power On and RF
Activity Indicators
|
Wiring Diagram
Antenna not supplied Select Antenna
Select Transmitter
|
SPECIFICATIONS
| Output |
N/0 and N/C
relay 1 Amp @ 32 VDC isolated contacts |
| Operating
Voltage: |
12 to 15.o VDC |
| Operating
Temperature: |
-4° to +140° F (-20° to +60° C) |
| Receiver Type: |
Digital Superheterodyne |
| Sensitivity: |
-118
dB (minimum) |
| Selectivity |
6
KHz |
| Carrier
Frequency |
27,255 MHz |
| Number of Codes: |
65,536 |
| Code Setting
Method |
DIP switch programming |
| Data Input |
Alarm, restore, status, and low battery |
| Status Exception |
Time Frame: Four hours |
| Antenna Impedance |
50 Ohms Quarter Wave Antenna
Optional
Whip 8" Antenna |
| Dimensions: |
4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159
mm) |
| Weight |
1 lb.
(0.454 Kg) |
| Current
Drain |
25
mA, typical standby 65 mA alarm @ 12 VDC |
| Outputs: Alarm |
form "C" relay per channel |
| Status
exception |
one open collector output per receiver; |
|
Low Battery |
one open collector output 50 mA @ 20 VDC to ground |
Required:
Whip 8" Antenna or Long Range Antenna
Optional: Power relay
Latch relay |
.
|
