Power: One 3V DL-2032 lithium battery (supplied)
Operating Frequency: 315 MHz
Compatible Receivers: 936004 936008
When carbon monoxide is detected, the alarm sounds a loud local
alarm. The built-in transmitter sends a digitally coded wireless
signal to its companion receiver every 20 seconds until the air
has cleared and the detector is restored.
The local alarm can be silenced once by pressing the test/reset
button. The transmitter will continue to send an alarm signal
every 20 seconds. After 7 minutes, the alarm will sound again if
there is still an unsafe carbon monoxide concentration level.
The reset function can be used only once for each alarm
No field coding is required the 936080 is factory set to
a unique code; one of over a million possible codes.
The battery is supplied and can power the unit for up to the six
year life of the detector. If the battery voltage drops below a
preset level the alarm will sound a low battery chirp every 45
seconds and a low battery signal will be sent to the receiver.
At about 6 years, the carbon monoxide detector element will
reach the end of its serviceable life. The self-supervising
detector will signal a permanent trouble condition, indicating
time for replacement.